KFSSI WIKI

Da Keshe Foundation Wiki it.

Portal:Plasma Technology for Health


Indice

Preface

This WIKI supports all people around this world, adopting Keshe Plasma Technologies. The main content is compressed and summarized from the KFSSI’s (Keshe Foundation Spaceship Institutes) “teachings” which were held by Mehran Tavakoli Keshe at the Keshe Foundation Spaceship Institute and from knowledgde-seekers all over the world, who develop these technologies further. All participants of the teachings at KFSSI signed The World Peace Treaty; a contract with yourself in which you state that you lay down all tools of aggression here on Earth. If you would like to sign the Treaty, you can download it here: http://www.keshefoundation.org/images/pdf/WORLD_PEACE_TREATY.pdf

Within this WIKI you will find information and tools to balance your life and to bring peace to our wonderful world.

The Keshe Foundation

Mehran Tavakoli Keshe. Source: Keshe Foundation, 2016

The Keshe Foundation is an independent, non-profit and non-religious organization founded by nuclear engineer Mehran Tavakoli Keshe that aims to develop new scientific knowledge, new technologies and new solutions to major global problems like famine, water shortage, lack of electrical power supply, climate change and disease through the use of specially developed plasma reactors which will also give humanity the ability to travel in deep space.

Mehran Tavakoli Keshe was born in Iran in 1958, son of an X-ray engineer. He was introduced to the world of radiation and nuclear science at a very young age. In 1981 he graduated from Queen Mary College, University of London, as a nuclear engineer specializing in reactor technology system control. He has spent the years since then completing a system for the production of gravity and energy using a radioactive hydrogen-fueled reactor that is clean and safe. He has covered all aspects of the design of a new plasma nuclear system from the very beginning to its present stage. This has included the design, the fuel, testing and practical applications. He has concentrated on completing the full range of his technology for launching into the scientific world and industry. The intellectual properties related to this technology were transferred to Stichting the Keshe Foundation.

The Essence of Keshe Technology

Magnetic fields. Source: Keshe Foundation, 2016
Superposition of magnetic fields leads to magnetical and gravitational fields. Source: Keshe Foundation, 2016

"Magnetic Fields"

Since Albert Einstein's E=MC², it is a scientifically accepted fact that matter is convertible into energy and vice versa. This implies that both matter and energy must be the same by nature.

Everything that exists in all of creation is made up of "magnetic fields." These fields have the two ferromagnetism properties - attraction and repulsion. Opposite poles attract each other while like poles repel each other.

All phenomena in all of creation derives from the diverse interactions of magnetic fields.

Magnetical and Gravitational fields

A superposition of magnetic fields, which create an outward directed force from the respective centre (an outward field flow), Keshe refers to as Magnetic (capital M) or, for better distinction in spoken language, Magnetical, which is a word introduced by Keshe for this special purpose. The reverse superposition of magnetic fields that develop an inward directed force towards the respective centre (an inward field flow) Keshe refers to as Gravitational (capital G).

Magnetical field flow releases fields to the environment and are therefore available to organisms that require them, while Gravitational field flow absorbs fields from the environment. Gravitation field flow will absorb for example fields from an organism that has fields in abundance that it does not require or that are the wrong fields for the organism.

Plasma

Every physical object (electron, atom, grain of sand, plant, animal, human, planet, star, galaxy, universe, etc.) is nothing more than an accumulations of magnetic fields which Keshe refers to as plasmatic magnetic fields. These plasmatic magnetic fields consist of a huge quantity of individual magnetic fields. Plasmatic magnetic fields are three dimensional, the movement and area of which is determined by the individual magnetic fields within the object. Each of these plasmatic objects is referred to as a plasma and is defined by the field content within it.

The Keshe Foundation does not use the word plasma in the same way that it is used in standard physics. The Foundation does not refer to the state of an ionized gas when they say "plasma." Plasma is defined by the Foundation as the entire content of fields which accumulate and create an object. It is NOT defined by its physical characteristics like ionization and temperature, for example. Plasma refers exclusively to the properties of the fields of which an object consists.

In most cases, fields extend far beyond the physical boundaries of the object in question. As well, there are field compositions (plasmas) that are already detached from their physical source and are moving in a non-physical form (as a pure field body) through space to another physical (or non-physical) object. The movement of these field conglomerations is considered to be a kind of “flowing.” The Foundation therefore defines energy as fields that move and flow in space from point A to point B.

GANS for "producing" magnetic and gravitational fields. Source: Keshe Foundation, 2016

GANS

Certain atoms and molecules release and/or absorb Magnetic and/or Gravitation fields. Released fields are available to be absorbed by other objects. The Keshe Foundation has developed a way in which to gather these free flowing fields from the environment within a usable substance which Keshe named GANS.

An organism for example will emit fields it wants to separate itself from (rid itself of) and will absorb fields that it can use or that it has an urgent need for. The prerequisite is that the appropriate fields for absorption must be available within the immediate environment of the organism.

Schematic View of Plasma Coil Unit. Source: Keshe Foundation, 2016

A tool was developed by the Foundation which consists of components that can absorb fields and create GANS; a substance that exists in a special state of aggregation. Different types of GANS can be created with different desirable energetic properties that can be used individually or in combination for different applications. Each type of GANS has specific field strength depending on the chemical elements within the GANS.

The use of different GANS' with different field strengths or the use of nano-coated double coils with plasma batteries causes a directed field flow from the stronger to the weaker fields.

If these field fluxes are directed through an organism, the organism has the opportunity to absorb the needed parts of these field fluxes or to release a surplus of fields to the environment or they can be collected into a usable GANS.

With this technology, the self-healing powers of the organism are supported at the level of the fields that build up the organism itself. Therefore, the need for chemical agents and processes are not required because healing occurs at the level of Magnetic field interaction.

Plasma Coils

Plasma coils are made of two nano-coated double coils. Each double coil consists of two coils that are wound and wired in a specific way (coil blueprints are available on the Keshe Foundation website). The two double coils are mounted at 90 degrees to each other. Different types and combinations of GANS' are placed on the coils to create different fields strengths. At the center of the double coils a field is created.

An organism is made of fields and can be placed between the coils of a device the Keshe Foundation calls a Plasma Coil Unit. At the centre of the unit, within the space in which the organism would be situated, the Gravitational and Magnetical fields, created at the centre of the coils, interact with the fields of the organism. The strength of the fields created by the coils does not diminish because the coils constantly attract and gather fields from the environment. As a result of the interaction of the fields of the coils and those of the organism, a balancing takes place. The organism experiences a balancing as do the coils. The procedure is complete when the organism and coils find balance.


Nanocoating and the Production of GANS

The philosophy of the Keshe Foundation is, plasma should be available for free to humanity. This is why all steps of production are open source and available at no cost to the public. Step by step instructions on how to produce different types of GANS' are available on this WIKI. The Foundation manufactures products. If you would like to purchase one of our many products, please go to the Keshe Foundations Webshop: https://store.keshefoundation.org/store/

Nano-Coating of Copper

Main ways, how to coat copper or other metals, Source: Keshe Foundation, 2016


The base material for the coating is copper in any form. The coating is carried out either chemically by etching (steam coating with NaOH) or thermally by heating (Fire Coating by gas burner). During the coating process "gaps between the [outer most layers of copper] atoms" are created. The coating is often referred to as nano-coating, the layers of which build up during the process of the creation of the coating.

Steam-Coating Process with NaOH

In order to coat copper wires or plates, you will need:

  • A plastic container with lid (not too big)
  • Weights for weighing down the lid
  • Ready-wound copper coil, wires or plates
  • ~ 100 grams of pure NaOH powder or beads (Do not use drain cleaners. You can buy it in art shops; it is used to remove paint as alkaline-based stripper, or in chemist's/drugstore)
  • ~ 2 liters of distilled water (according to the quantity of coils and size of the plastic container)
  • Electric kettle or stove top to boil water

Phase 1: Caustic bath (~ 2 days)

This first stage prepares the materials for the steam coating process:

  • A zinc grid (can be a mesh, which is zinc coated) is placed at the bottom of the plastic container.
  • Scatter just enough NaOH powder to cover the entire bottom of the container.
  • Before placing the plates in the container, you can drill two small holes at the top corners of the plate(s) which will be used in Phase 2.
  • Place the coils and/or plates directly on the mesh (the coils and/or plates sit on the grid so as to not touch plastic).
  • Place the lid, slightly askew, on the container. Leave a small opening.
  • Boil distilled water and pour it (boiling) into the container via the opening until water covers all the coils and/or the plates.
  • Quickly close the opening by placing the lid correctly on the container.
  • If necessary, place a weight on the lid to ensure as little steam as possible escapes.
  • Leave the container in this state for 24 hours.

Caution, during the pouring of boiling water, steam will escapes. Please wear protective glasses and protective gloves during this process.

Phase 2: Caustic Steam (~ 2 days)

  • After 24 hours have passed, open the plastic container and remove the coils and/or plates. Leave the mesh in the container.
  • Remove the liquid from the container. (Caution - store or dispose of the liquid correctly)
  • Hang the coils or plates, which were previously submerged in NaOH water, on copper wires (utilize the holes at the corners of the plates to hang the plates).
  • The coils should hang roughly 2cm above the bottom of the container and should not touch the container walls, the mesh or the other coils or plates.
  • The plates stand on the mesh, vertically, hung on wires.
  • Place NaOH to cover the bottom of the container as in Phase 1.
  • Place the lid askew.
  • Boil distilled water and pour it boiling through the hole to a depth of roughly 1cm.
  • Close and fasten the lid quickly to stop steam from escaping.
  • Let stand for 2 days.

(Caution - Use protective glasses and protective gloves during this process).

Phase 3: Drying/draining (minimum 3-4 days)

  • The coils and/or plates now begin the drying process.
  • Pour most of the liquid out of the container. Leave a bit of the water in the container and leave it covered, not weighted.
  • Every 6 hours, for the next 3 or 4 days, take a multimeter (set on mv) and touch the mesh with the negative pole and the copper plate with the positive pole at several positions to drain the plate(s) voltage.
  • For coils, if its a double coil, touch the coil with the negative pole of a multimeter at the positive pole of the coil and touch the positive pole of the multimeter at the negative pole of the coil for a few seconds, to drain the voltage out of the coil(s).
  • When this process is completed, never touch the nano-coating and ensure the coils and/or plates never touch each other.


You can watch this process again on this Official Youtube Video from the Spaceshipinstitute:

Fire Coating with Gas Burner

Gas burner (gas torch, blow torch) with butane gas

With this type of coating process it is not necessary to go through the process of polarization (draining the voltage) and drying. However, temperature and direction of application of the fire coating is crucial. When applying the fire coat, the direction in which you apply the flame to the copper must always be in the direction of flow of the coiled wires and the wires must never reach a point of glowing due to the application of heat. Once the wires are heated to a point where they begin to emit a golden shimmer, the gas burner should be moved to an adjacent point on the wires. (For clarification, this will be explained in detail below with an accompanying video).

Moreover, the coils will begin to cool as soon as you move the flame from an area that is being heated to an adjacent point. If, after a few seconds of the heat being removed from an area, the wires take on different colors like red, turquoise or blue throughout the area, this is an indication that the temperature during the fire coating of that area was too low. If this occurs, simply return the flame to the area and coat it again before moving to an adjacent area. If however the wire begins to glow, the temperature is too high and you should back the burner away from the coils slightly to decrease the temperature and continue coating. With practice, the application process becomes automatic.

To fire coat, you require:

  • A gas burner with butane gas (it also works with a propane / butane mixture)*
  • Copper coils or plates
  • Refractory mounting device for mounting/hanging) the coils or plates (preferably metallic)

Important: Do not apply the fire coat in rooms that are too cold. Doing so will cause the coating layer to easily separate from the copper wire. There are also differences in quality of the copper wires. Sometimes slight cracks at the surface of the raw uncoated wire can be detected.

Note: Please use a gas burner with a tight and narrow pointed flame when applying the coating to ensure very accurate pinpoint application at an area on the wire. If you use a wide, broad flame you will heat up too wide of an area of wire at once. This will result in inaccuracy in the direction of heating of each coil. (Please view the following video for clarification).

https://www.youtube.com/watch?v=gRaeT-7zIJs Fire Coating Video

GANS production and application

Formation of GANS. Source: Keshe Foundation SSI, 2015

GANS is the abbreviation for "GAs in Nano-state of Solid." The Keshe Foundation has developed a method by which carbon dioxide (CO2) can be extracted from the air by simple means and converted into a solid state in the nanometer range (nano-state of solid). Production of CO2 GANS results when carbon in the air joins with oxygen of a salt solution. Within a kind of plasma bubble, consisting of Magnetical and Gravitational fields, this conjunction is brought into a crystalline form. These crystals absorb light (the fields) and store and release them according to demand. Each crystal is like a sun!

The Keshe Foundation discovered that GANS, dried as well as bound in water, is useful as a source of energy or can be usefully applied in areas of health and agriculture. Once GANS is produced it can be stored in distilled water to keep it moist. When it is stored in water, GANS does not mix with the water, it settles at the bottom of the water. GANS water is defined as the clear distilled water in which GANS is stored. The water (see description of GANS washing) can be used in various ways. It is possible to pour it into bath water, to make health patches as wound dressings or to use it as a spray. Small volumes of it, like drops diluted in water (Liquid Plasma) are drinkable. The applications for the use of GANS and Liquid Plasma are limitless.

The process of GANS production, developed by the Keshe Foundation, does not only work for the production of CO2 GANS, but also for other types of GANS. The drawing (Formation of GANS) shows schematically the development of GANS, the base of which is raw copper. Note the compact atomic structure at the bottom of the graphic. In the first step of the process of the formation of GANS, copper is nano-coated. During the coating process spaces between atoms are formed and nano-layers with nano-wires are created (see Coating). Nano-coated copper in interaction with a zinc plate, in a salt water solution, creates CO2 GANS which collects and settled at the bottom of the collection container (see Production of CO2 GANS).

GANS is required for the operation of the Keshe Foundations Magravs systems (see the product descriptions for the Magravs Units in the webshop at www.keshefoundation.org for information on the Magravs products). GANS is a key component in all of the Foundations products. For example, it is used to coat wound copper coils and used in GANS tanks (e.g. ping pong ball) at the center of coils. As well, GANS is required in order to produce GANS water which is in-turn used to produce GANS fields. Various types of GANS waters are used in many areas of society. Find below descriptions on the production of the four basic kinds of GANS, which are produced by immersing nano-coated copper wires or nano-coated copper plates, in combination with various metals, in a 10% sea salt water solution (100gm sea salt dissolved in 1 litre of distilled water).

Materials required for the production of GANS:

  • Plastic container
  • Distilled water
  • Unrefined, natural sea or rock salt
  • Nano-coated copper wires for short-circuiting of the metals
  • Nano-coated copper plates or coils
  • Various uncoated metal plates (zinc, copper, iron) which are needed for the production of different types of GANS'

This table gives an overview:

GANS Color Coated Material Uncoated Material salt content
Co2 (ZnO + Co2) white coated copper zinc 3-10%
CH3 (FeO + CH3) reddish brown coated copper iron 3-10%
CuO (CuO + Cu) turquoise coated copper copper 3-10%
ZnO white coated copper zinc 3-10%

CO2 GANS

Washed CO2-GANS with green LED, generates far less and shows structure. Yield after 4 days.
File:Co2-gans.jpg
CO2-GANS without LED, high amount of Zinc oxide. Yield after 1 day.
CO2-GANS dried without LED, high amount of Zinc oxide. You bring this with the double amount of NaOH (weight) and hot distilled water into a “nano state.” Wash it at least 5 times or more (pour out the water after the GANS has settled and fill the container again with fresh distilled water each time). What remains is pure CO2-GANS (usually very little).
Connections of LED, but please use a green LED!
LED lights when production is going well and electricity is produced!

Production

CO2 GANS is produced by placing a zinc plate, connected to a nano-coated copper coil or nano-coated copper plate, in a sea salt water solution. Dissolve 100 grams of sea salt in a liter of distilled water and pour the solution into a GANS collection container. Ensure all of the salt is dissolved. There are different ways in which to connect the zinc and copper plates or coils together, which will affect the ratio of CO2 to Zinc GANS produced. In the following video Keshe explains in detail how to produce CO2-Gans:

CO2/Zinc Oxide GANS mixture, in a ratio of 20:80

To create a higher yield Zinc to CO2 GANS, the nano-coated copper plate/coil is connected directly to a zinc plate with a piece of copper wire. If you wish, you can drill a small hole at a top corner of each plate to hook the wire to, however, ensure you drill the hole in the copper plate PRIOR to nano-coating it. Or, you can use alligator clips to attach to the LED and plates together. NOTE: ensure you do NOT scratch the nano layer off of the copper plate with the clip. Make certain the bottom of the plates or coils do not touch the bottom of the container. In this direct connection method, GANS is created very quickly. However, the amount of CO2 GANS created is relatively low in respect to Zinc GANS created within the GANS mixture. (NOTE: GANS that is white in colour has a higher content of zinc in it than CO2).

Headline text

CO2/ Zinc Oxide mixture in a ratio 90:10

Zinc oxide GANS (ZNO) can not be completely eliminated from the GANS mixture when creating CO2 GANS, but this is of no consequence. However, if you follow these steps, a higher yield of CO2 to Zinc oxide GANS will be created. The colour of the GANS created is an indication of what type of GANS has been created. A white coloured GANS indicates more Zinc GANS in the mixture while a cream coloured GANS indicates a higher yield of CO2 GANS created within the mixture.

A nano-coated copper plate and zinc plate are connected together with a regular piece of copper wire. Ensure the bottom of the plates or coils do not touch the bottom of the container. Cut the wire at the mid point and connect a small LED light, or coil of a PC fan, to the ends of the cut wire. Connect the anode (longer piece of wire = positive pole) of the LED with the wire that leads to the coated plate/coil, and the cathode (notch or shorter needle on LED package = negative pole) with the wire that leads to the zinc plate. (Small holes can be drilled into one corners of each plate, PRIOR to the nano-coating process in the case of the copper plate, that can be used to connect the wire to the plates. You can void drilling holes in favour of using alligator clips to connect the LED to the plates, however, it is VERY IMPORTANT to ensure you do not scratch off or the nano-coating of the copper plate when attaching the clip). After a few hours, a cream coloured layer of CO2 GANS will starts to settle on the bottom of the container. (Note: NO CURRENT is necessary from either a batterie or power supply for the creation of CO2 GANS). (Further note: the colour of the GANS denotes the ratio of CO2 to Zinc GANS in the mixture.

Required Materials:

  • Plastic tub/container or cut bottle
  • Zinc plate
  • Nano-coated copper coil or Nano-coated Copper plate
  • A length of copper wire.
  • Green LED
  • 100gm of sea salt
  • 1L of distilled water

CO2 GANS: Uses/Applications

CO2 GANS water (liquid plasma) can be used pure or diluted depending on the treatment requirement. It will activates cells, revitalizes the body and strengthens the immune system. CO2 GANS water is very beneficial to all kinds of muscle injuries. When used as a spray it immediately relieves pain. However, in the case of a broken bone(s), do not apply CO2 GANS water directly to fracture(s). Pain at the point of a bone fracture triggers the body to bring needed calcium to the area of the fracture that is required for the healing process. Therefore, do not spray directly on the fracture point; spray the area around it.

  • Oral Application: CO2 GANS water can be taken orally (Eg. drops or 5ml to 25ml in half a liter of water - 1 to 2 times daily (according to the recommendations).
  • Foot Bath Application: Add CO2 GANS water to lukewarm water in a foot bath. When repeatedly applied this eliminates athlete's foot and pulls heavy metals out of the body.
  • Full Bath Application: You can use CO2 GANS water AND the GANS waters of ZnO (zinc oxide), CH3 (iron oxide) and/or CuO (copper oxide). For example, with radiation contamination, Keshe recommends taking a bath with 2 to 3 litres of CO2 GANS water in the bath mixed with warm water, and staying in this water for half an hour 2 to 3 times a day.
  • Scalp and Hair Application: You can regularly rub CO2 GANS water on the scalp and in the hair. It soothes the scalp, strengthens hair folical roots and has been shown to bring the original hair color back.
  • CO2+ ZnO GANS Liquid Plasma Mixture Spray Application: On the face- revitalizes the skin, refreshes and rejuvenates the skin.
  • Aftershave Lotion Application: Alleviates cuts immediately and relaxes the skin.
  • Eczema Application: Spray the affected skin areas with CO2 GANS water - to date, very rapid improvement has been reported.
  • Bee sting Application: Sprinkle the area of the sting with CO2 GANS water several times.

NOTE: CO2 GANS, CO2 GANS water and liquid plasma of CO2 are used in health applications AND for energy production.

CH3 GANS

Schematic setting of CH3-production without current; instead of the shortcut you can also use DC of a battery

Production

CH3 GANS is produced by using an iron plate, or other source of iron, in combination with a nano-coated copper coil. The two metals are connected together with a copper wire. Unlike the production of CO2 GANS, you can use a very small amount of DC current and a fish tank pump (aerator) to speed the production process, but the pump is not mandatory. You can use a common, adjustable DC device, which produces current of approximately 15 mA between the two metal plates instead of the connection of a copper wire. If you do, the negative pole of the device is attached to the nano-coated copper plate and the positive pole of the device is connected to the iron plate. You could also use a 1.5 V battery as power source. If you use any kind of current you should aerate the salt solution with a small fish tank pump. It will only take a few hours to produce a reddish brown layer of CH3 GANS at the bottom of the container. To get a better result, you can mount a coil of a PC fan between the two plates instead of a wire or a current source.

Required Materials:

  • Plastic Container
  • Iron plate
  • Nano-coated copper coil or plate
  • 100 grams of sea salt
  • 1 litre of distilled water
  • Optional: DC-Device and fish tank aerator

CH3 GANS Application

CH3 GANS water and liquid plasma of CH3 GANS will strongly energize the body and is nutritious. For instance, 8 drops of CH3 GANS water combined with 1 drop of ZnO GANS water and 1 drop of CO2 GANS water will yield the following results. The plasmatic field of CH3 GANS water gives energy to the body while the plasmatic fields of the ZnO GANS water support the nervous system. The plasmatic fields of the CO2 GANS water acts on muscles and the nervous system. The carbon within CH3 and CO2 GANS waters release energy while the hydrogen of the CH3 GANS water and the oxygen of CO2 GANS water combine to provide moisture, which is needed in the body. The energy of the hydrogen of the CH3 GANS water becomes food for the body. The ZnO GANS water supports nerve connections that are needed assimilate energy into the body. To assure the application is effective, always add one drop of amino acid of each type of GANS to your drop mixture. The amino acid builds up on the top of the salt water solution during the production of each of the GANS'.

Every time you want to apply CH3 GANS liquid as food you must add amino acids. The amino acids tell the body that the energy is provided for the body. The GANS and the amino acids are created within the same container and therefore have an inner connection regarding their inner structure. This inner connection is necessary for the fields of the GANS and its information, which are available within the GANS water and the liquid plasma, to be transferred to the molecules of the cells of a living body. Procedures are topics of present and future research. CH3 GANS is also necessary for technical energy production.

CuO GANS

CuO-GANS before it has settled. CuO-GANS has just to settle.

Production

For the production of CuO GANS you need an UNCOATED copper coil, or copper plate, and a nano-coated copper coil or a nano-coated copper plate. The two plates are connected with a copper wire and placed in a sea salt water solution. To speed up the GANS production process, you can use a small amount of DC current and an small aerator (fish tank pump). A DC-device, which provides approximately 15 mA DC current between the two plates, or coils, can be used instead of the copper wire between the plates. The negative pole of the device is connected to the nano-coated copper and the positive pole of the device is connected to the uncoated copper. If you use a current you must apply an aerator to provide additional oxygen to the salt water solution. After a few hours a turquoise layer builds on the bottom of the container and settles there. This is CuO GANS. To get a better result, you can mount a coil of a PC fan between the two metals instead of a wire or a current source.

Required Materials:

  • Plastic Container
  • Uncoated copper plate (or coil)
  • Nano-coated copper plate (or coil)
  • 100 grams of sea salt
  • 1 litre of distilled water
  • Optional: DC Device and aerator (small fish tank pump)

CuO GANS Application

Copper represents the physical body (in connection with the field interactions); it affects the muscle tissue and the nervous system. Copper is responsible for good communication through the nerves and copper acts as a disinfectant. In Ghana the Keshe Foundation, in cooperation with the national Atomic Research Institute, carried out tests where microbial contaminated drinking water was cleaned with CO2 and CuO GANS water so that is was transferred into drinkable water. Bacteria, salts and even arsenic and a mercury could be neutralized through CuO GANS water so that it was no more detectable in the tests. With the GANS water of CuO many areas can be disinfected. e.g. rooms where food is produced, hospitals, kitchens, toilets, bathrooms and so on. CuO is also used in the technical energy production.

ZnO GANS

ZnO-GANS.

Production

For the production of ZnO GANS you need a zinc plate (or zinc coil or zinc mesh) and a nano-coated zinc coil (or a coated zinc plate), which are connected and placed in a sea salt solution. The two metals (plates or coils) are connected together by a copper wire. To speed up production you can use here a small amount of DC current and an aerator (fish tank pump). You can also use a DC device that provides approximately 15 mA DC current between the two plates (or coils) instead of the copper wire. The negative pole of the device is connected with to the nano-coated zinc and the positive pole of the device is connected to the uncoated zinc. If you use a current you must use an aerator (fish tank pump) to provide additional oxygen to the salt water solution. After a few hours a white layer will build up on the bottom of the container and settles there. This is ZnO GANS. To get a better result, you can mount a coil of a PC fan between the two metals instead of a wire or a current source.

Required Materials:

  • Plastic Container
  • Uncoated zinc plate (or coil)
  • Nano-coated zinc plate (or coil)
  • 100 gram of sea salt
  • 1 litre of distilled water
  • Optional: DC Device and fish tank pump

ZnO GANS Applications

Zinc is a key component in more than 80 human metabolic cycles and plays an important role in the healing of wounds. The Magnetic/Gravitational fields of ZnO GANS and/or ZnO liquid plasma interact with the fields of human emotions and therefore can be used to strengthen and balance human emotional needs. Liquid plasma of ZnO GANS is termed “peace plasma.”

  • ZnO Health Applications: ZnO GANS water (ZnO liquid plasma) can be applied everywhere the liquid plasma of CO2 GANS is used because emotional imbalance, conflicts and stress are the most frequent causes of human illnesses and diseases. ZnO plasma aids almost all healing processes.
  • Double Walled Health Cup Application: The gap between the walls of the cup are filled with ZnO GANS water. The cup can be used for two purposes. 1. Fill the cup with water and let stand for several hours. The water will be energized by the fields of the ZnO plasma water. Drink the water. 2. Leave the cup empty and use a straw, placed in the cup, to inhale the ZnO energized air from the cup.

How to Make GANS Tablets/Capsules

Possible Output: GANS-Patch.


If you are starting with a hard tablet, start by crushing it into a powder using a pill crusher. Capsule (of powder): Open the capsule and pour contents into small container. People mostly use tablet or capsule. This is enough to make plenty of Nano and GaNS of it. And thus make an unlimited supply of the plasma waters carrying its attributes. Stop and think about the implications. Important note: Check the integrity/strength of the containers you plan to use before starting to experiment. if using plastic containers , try pouring some boiling water in it first to ensure the plastic is strong enough to take the boiling water without loosing its integrity. Also be ware of using glass containers. Make sure that it can take boiling water. i.e. use Pyrex

There are 2 ways to figure out the proportions.

  • Method 1. Fill a ¼ tsp. measuring spoon with the powdered vitamin. (if the pill is small you may have to crush several) Add this to the mixing cup. Now measure the same amount, ¼ tsp. of the dry caustic. And add this also to the mixing cup. This means we have about 1/2tsp of dry ingredients. Now add 10 x that much of recently boiled water. ½ tsp. x 10 is 5 tsp.
  • Method 2: Match the quantity of the pill to an equal amount of Caustic. (This works well with standard capsules as they contain about ¼ tsp. of powder, which is about 1.25grams) Measure the dry ingredients then add the amount of very hot water that would be 10 x that amount.
Making of different GANS-waters.

Choose Method 1 or 2 above. Shake or stir the dry mix of the 2 dry solids. (The reaction may start) so fairly soon, add the recently boiled water that is about 10 x the amount of the dry ingredients. In the case of this example, 10 x 3 grams is 30 ml. So quickly pour the hot water into the container with the dry ingredients and cover with top. Let the NaOH work on creating the Nano material. Leave this for 3-7 days.

Prepare a CO2­‐Zno GaNS Capture container for each Vitamin Nano. I Use a Nanocoated copper coil, piece of Zinc from the “Moss stop” Roll & a LED light to slow the processing. I use a 10% salt solution which is ½ cup salt in 1 gallon of Distilled water. Rinse the Nano Sediment in the usual way. I use a syringe to remove the sediment into another container, add about 30 ml of distilled water, let it settle then repeat about 5-10 times. Use the Syringe to remove some of the Nano Particle sediment and add it to your CO2-­‐ZnO Capture container.

FYI. GaNS of Herbal / Plant materials can be done in a similar way.

Let the GANS Process for several Days. Mine were done in 3-5 days. Keep an eye on the Nano coating to make sure it is still intact. If it is starting to thin then stop the process. Rinse the GANS in the usual way. Mine usually want 3-6 rinsing's. Store the GANS with distilled water. Use the plasma water above the GANS to make patches.

GANS Uses: Moist or Solid?

Depending on the need, GANS can be utilized in a liquid or solid state. You can store GANS in distilled water, keeping it moist, or you can remove it from the distilled water and dry it into a solid and/or crush it into a powder. In the end, the energetic properties of the GANS remains intact. For health application we most often use only GANS water (liquid plasma).

Harvesting the “Amino Acids”

Before you are able to deal with the GANS you have to pick up the oily substance which is created during the GANS production and is floating on top of the salt water, because this substance is a valuable ingredient for a lot of applications. This oily layer obviously is a kind of organic substance. Mr. Keshe speaks about “amino acids.” What actually is created in each of the GANS containers, which has variation under certain circumstances and conditions, has to be investigated in due course of time. For simplicity reasons and provisional reasons these substances, which are created on top of the salt water of the GANS production container, are called “amino acids” because amino acids are essential parts of the physical body of a living being.

These layers of amino acids, which are swimming on top of the salt water, are quite thin. Therefore it is not so easy to collect them. You can suck them in with a pipette or a syringe (but in this case you will collect much of the salt water, too). It is better to take a tool (e.g. a spoon, a glass rod,…) and touch them with this tool so that they will be attached to it. You can also use a sheet of paperboard or a plastic foil to pick up this layer on top of the salt water. You will have some training to do it well.

The harvested amino acids can be stored in liquid form or, especially if you collect them with a paperboard, you can dry it in a sunny place. Then you can put the powder in a glass or can. Please always label it instantly (e.g. with: amino acids above CO2 GANS)

As soon as you have collected the complete layer of this oily substance (amino acids) – probably in a few attempts – you can start with the process of washing the GANS.

Washing of the GANS

To get usable GANS the GANS has to be washed to reduce the salt content. This happens in the following steps:

  • Pour out or suck out the salt water above the newly created GANS carefully with a syringe or manual pump**
  • Put the liquid with the GANS substance in a preferably high glass jar (or another high container)
  • Fill this glass jar with the GANS substance with distilled water up to the top.
  • Wait until the GANS has settled at the bottom of the glass jar.
  • Suck out the water above the settled GANS with a syringe or a pump again.
  • Fill the glass jar again with distilled water into the settled GANS.

Repeat this process (sucking in the water above the GANS and filling up with new distilled water) at least 6-10 times, after this the GANS is washed.

Alternatively: If you have produced your GANS in bottles, mounted in a board upside down, you can open the screw cap of the bottle and let the GANS carefully pour out.

Additionally to the methods of GANS production, which were introduced here, there are a lot of alternatives. In due course of time they will be introduced, too.

Production of GANS-Water

GANS-water filled in bottles
Drying of the GANS on top of the heating

As soon as the GANS is washed several times there is hardly any salt in the suspension. Then it can be used for further processing.

To get GANS water you have to fill up the glass jar with the GANS substance with distilled water again after the last washing run. Stir the suspension very well to strengthen the field transfer and the transfer of information.

For the water to be able to absorb the fields and the information which are released by the GANS completely, you should leave the suspension for at least 24 hours.

Afterwards the water above of the already settled GANS can be considered as charged with the field properties of the GANS and is informed. Now it can be used for the various applications. This newly charged/informed water above the settled GANS is called “GANS water.”

If you take from this GANS water for your applications please be aware to take actually only the clear water and nothing of the GANS substance itself (except if you need them consciously and deliberately).

The GANS itself (the GANS substance) stays in the glass jar (or other container) and can be filled up with new distilled water again and again, limitlessly.

After you fill it up again please stir it well and leave it for at least 24 hours. Now you have produced a new jar of charged GANS water.

Production of “Liquid Plasma”

From every type of GANS water we can produce the respective “liquid plasma.” For the production of “liquid plasma” you take a few drops or ml of GANS water with a pipette or a syringe and “vaccinate” these few drops of GANs water into another container of fresh pure distilled water.

The information is transferred from these drops to the whole water content of this container instantly, especially if it is stirred or shaken properly. For stirring you use preferably a stirrer which you easily can produce by yourself with a nanocoated copper coil and a rod. The turbulences due to the created vortexes within the water act like amplifiers (this is similar to the procedure in homeopathy).

If you do not have any nanocoated stirrer you can use any stirrer, like a spoon or a rod or a blender.

This newly produced mixture (of pure distilled water and the few drops of GANS water) Mr. Keshe calls “liquid plasma.” If you produce liquid plasma from GANS water for internal use (to drink), you can put the GANS water drops (or ml, teaspoon, soup spoon) also in normal drinking water. In this case you should not stir with a nanocoated stirrer, but only with a normal spoon.

Drying of the GANS

Optional: Drying the GANS with a fan

The aim of drying the GANS is the gentle withdrawing of water, the drying must not be carried out (under any circumstances) by heating upon open fire or on a stove. The more natural the drying happens the better it is. It is possible to speed up the drying process by putting it on top of a heating radiator or turning on a lamp (with a heat producing bulb) near the GANS container. If crystals are built during the drying process, the GANS was washed too little and these are salt crystals. Over time, you will receive GANS paste and after the lapse of another number of hours you will get GANS powder.

Plasma Technology for Health

Keshe Foundation offers you a bright bandwidth of information from solid plasma to liquid plasma to field plasma and depending on yourself you will resonate with one of these, information or devices. These systems will support you in processing your life, the main issue is that they have the potential to elevate your soul and the souls of the people around you.

The role of Emotions at Plasma-Technologies

Plasma Technology works on the level of fields "behind" the matter we can touch, everything in Plasma-Technology is "built" out of fields, therefore also "emotions" are specific fields, which can influence the matter, especially, when they are isolated in specific areas around our physical body and the there is no natural flow possible anymore. In Plasma Technology we set a high value on the role of emotions, therefore you will find in different chapters a lot of information about psychological, emotional origins of specific diseases.

Therapists, doctors and authors, who wrote books, or developed specific techniques to detect e.g. isolated emotions or give us more information on which emotion could be connected with which disease are:

  • The Key to Self-Liberation: [1] This encyclopedic work by Christiane Beerlandt shows the psychological-emotional origins and solutions of disease. The book offers practical guidelines and entries about 1000 diseases.
  • The Emotion Code: [2] In The Emotion Code, Dr Bradley Nelson reveals how emotionally-charged events from your past can effect you in the form of “trapped emotions”; emotional energies that literally inhabit your body.

The Basic Tools of Plasma-Health-Technology

Ways to use GANS-water. Source: Keshe Foundation, 2016

People all over the world use the GANS and its water within different devices and cures. With this technology, the self-healing powers of the organism are supported at the level of the fields that build up the organism itself. Therefore, here we do not use chemical agents and processes but the interaction processes at the levels of "magnetic" fields. GANS water for instance can be used in a spray or as a patch. You can drink or inhale GANS water, bathe in it, stand or lay between walls of GANS or stand near rotating balls, which strengthen the effect of GANS.

Seen in a more structured way, we can distinguish between the use of (1) the Pain Pens, which are made of nanocoated copper wires, (2) GANS Patches, which contain different types of GANS or GANS water, (3) Plasma Units, which consist of two or more walls containing nanocoated doublecoils or rotating balls filled with different types of GANS, (4) Field Plasma Units, which are used to produce different types of GANS waters or to replicate specific parts of an organism or (5) GANS water injections, which can be directly injected with a syringe into a vein.


Liquid Plasma Therapy

Liquid Plasma. Source: Keshe Foundation, 2016

The Liquid Plasma Therapy can be used for all kinds of diseases, especially different types of cancers; it is a total cancer therapy. There are different ways of using Liquid Plasma, depending on the diseases patients have. You can use Liquid Plasma as a bath, as a drink or as an inhalation cure. You can also combine all three. Always keep in mind: “Nobody has ever died of cancer, we die of lack of energy. “

Liquid Plasma Bath

This kind of cure is the most powerful; tumors can be reduced by 80% within 10 Days. CO2 GANS water is the basis of the liquid plasma bath. The patient takes a bath in a bathtub, which is filled up with warm to the touch water and about 1-2 Liters CO2 GANS water. Do not use the GANS itself, use the water above it. Mainly use CO2 GANS, the CO2 GANS brings the body in balance. Use CH3 GANS mixed with CO2 GANS only when you have psychological depression before the cancer or due to cancer (also for MS, ILS, CVS and FMS). By using this liquid plasma bath you transfer energy from the body into the water; the water releases its energy into the environment.

Mix GANS with natural water, let the GANS settle at the bottom, take the top water and add this water into the bath. Just get a 5 liter water bottle, put about 20ml GANS into it, shake it, let it mix, let it settle to the bottom and add just the water into the bathwater. For patients, you can make 4-5 of these bottles that they can stay in the bath and the water covers the whole body. Put the bottles, closed also into the bath! No matter if the tumor is in the spine or the brain we have a position with it, as long as the mouth or nose shows out of the water it is ok. They can additionally put these bottles at the end of the bath, too, with the GANS in, and leave them in the bath. Instead of using the CO2 patch, we approach the whole body, several locations of cancers can be handled at one time (stomach, liver, pancreas etc.). It becomes a total approach. Patients should stay 1 hour at least 3 times a day in this bath. Patients can do it at home. As soon as the containers are empty, they can fill the bottles again for the next time. Also leave the 4 bottles in the bath.

Liquid Plasma Bath. Source: Keshe Foundation, 2016

This could also be realized with a Jacuzzi (bubble bath, whirlpool). You can use a Jacuzzi, where you just have to put the 4 bottles with CO2 and water in it. In a Jacuzzi, depending on the size, there can sit e.g. 15 people in it. What you do you is just keep on adding water from the bottle to the water. The water must not be heated, it should be warm, just warm enough that it is ok for the patients; they can sit and even chat. They don't need to do anything. Within the first 48 hours the first changes occur. Instead of leaving the 5 Liter bottles in the water, you can just let float Coca Cola Bottles that are filled with GANS and GANS water.

For the rest of the 80% of cancer reduction mentioned above, you need to have a detailed blood or/and urine analysis concerning metals in the blood. When you see heavy metals in the blood or urine, what does it mean? How do you interpret the high level of these materials in the blood? For instance, high level of mercury or lead? When we want to reduce the size mass of tumor up to 80 %, it is possible within weeks; the other 20% can be reduced by analyzing the blood of the patients and looking at the heavy metals, which are in the blood. When you stop therapy without doing this, the cancer becomes more aggressive. When there is a high level of mercury in the blood, for instance, it means the center of the cancer tumor, the mother feeder (mother which feeds the whole cancer) is mercury. The last 20% is a solid mass which is getting fed continuously by the mother! When you do a blood test or urine test now and you see high levels of a specific metal, it means that this is the seed of your cancer. For example: When you have the results of your blood test and you see a high level of mercury, it means mercury feeds the cancer and now you have to make a GANS of mercury. Cancer trains all the energy to itself, it’s heavily gravitational. Take GANS of mercury and put a few drops into the water near where the cancer is and then you find out that you killed the cancer inside. Now the energy from the seed is transferred; you deplete the center from its cancer, from the point where it’s absorbing all the energy.

How do you produce GANS of mercury or all materials that are difficult to handle? Put a container of mercury on top of a container that is filled with distilled water; it’s like the process which was done with the orange. Put GANS of CO2, CH3 and Amino acids around the container outside the glass. When you put the mercury above the water, it absorbs the GANS of the mercury into the water. Then you add the water into the water of the bath.

Liquid Plasma Drink Cure

Liquid Plasma Drink and Inhalation Cure. Source: Keshe Foundation, 2016

Additionally to the bath make a GANS of water, take 2-3 Soup Spoons of the GANS water, the water on the top of your container, not the GANS itself. Put the GANS water in a glass of water and drink this water two or three times a day. Not too much because you have to allow your body to be able to go for transformation!

Liquid Plasma Inhalation Cure

The Liquid Plasma Inhalation is very important, because by using a "Breathing Device", you directly address the emotions. This cure can be combined with all other Plasma cures and technologies. Especially for patients with lung problems (but suitable for all emotional based diseases), use "Breathing Devices", eg. put GANS water in a glass of water and breathe in with a straw, which you hold very close to the top of the water. Inhale the air around it. The Illustration shows a summary of the liquid plasma drink and inhalation cure.



Plasma Unit

Liquid Plasma. Source: Keshe Foundation, 2016

The Plasma Coil Unit is a device that consists in the basic version of two walls; on these two walls there are either nanocoated copper coils (Plasma Coil Unit) or balls filled with GANS water (Plasma Ball Unit), mounted. Both versions are holistic systems, which means that the whole organism can be balanced.

Plasma Coil Unit

Functionality
Schematic View of Plasma Coil Unit. Source: Keshe Foundation, 2016
Adding GANS Patches to address specific parts. Source: Keshe Foundation, 2016

The Plasma Coil Unit is a device, which consists in the basic version of two walls on which several coils are mounted. The coils are the typical double coils, with GANS on it, not connected in the way the (power) magravs are but in the specific “health-settings.” Plasma flows between the two walls through the human body. The Illustration shows this schematically. The advantage of this system is that not only a specific part of the body is affected, the whole body is covered by the plasma; it is a holistic system, the rest of the body can adjust, too! At the same time, it is possible to handle the emotions by using a combination of CO2 and ZnO GANS.

If the cause of an illness is emotional and this assumption fits to most of the "illnesses," it is possible not only to change the physical structure, it is also possible to allow the brain of the human being to be in the same position, too. After changes in the physical body, changes in emotional pattern follow, which means that people can be balanced in the long run.

By the additional use of GANS Patches we can concentrate energies where we need it.

Application

Basically you can use the Plasma Coil Unit for all illnesses. Place the body between the walls and additionally try to place the coils at the height where the source of illness appears to be.

Try to move the coils as close as possible to the body, but do not let the coils directly touch. You can use a thin foil to cover the coils. By using the Plasma Coil Unit of the Keshe Foundation, you can find a holder for foils to cover the coils.

A coil can touch the skin when covered by a thin plastic foil (e.g. in a plastic bag). This can be used at the sculb and at the body of the person. As soon as the coils touch the skin, the results are totally different than without touching. Because the heart beat, the pulse of the body, releases the right energy equal to the emotion needed, by the GANS on the coils. It’s the same to the magrav, the only reason that plasma releases this energy is because there are pulses coming from the electric system, the 50Hz. That pulsation releases the energy of the plasma. Using this in the health sector, the blood circulation pulse triggers the plasma; this is like a kick from your body to the GANS on the coils to release the energy. This way of using the coils is tailor-made to the patients, there is an interaction, what the body needs and what he gives. But be aware that the GANS does not touch the skin directly, put a foil around the coils.

The reason, the GANS patches work so perfectly, is because, when you put the patch on the naked skin, it “feels“the pulses, the vibration of the heart and that releases the exact amount of energy from the GANS that the body needs. This means that the GANS does not continuously release its energy and the body takes what it needs, the effectiveness of it is the “heart beat“itself. When you make GANS patches for the patients, make sure the patient sticks it on the body somehow. Not only what is needed is released, it is released to the amount that is needed.

Plasma Ball Unit

Functionality
Application

Pain Pen

KFSSI Pain Pen

Production
Application

GANS-Patches

GANS water in bottles; please use on your bodies only the GANS water above the GANS substance.

In health applications the members of the Keshe Foundation use only the water above the GANS (the GANS water) and/or the liquid plasma (see description above). The GANS itself must not be consumed under any circumstances. You must not touch GANS itself with any part of your body. For the so-called GANS patches or GANS pads mainly CO2 GANS water or liquid plasma of CO2 is used. All work should always be performed with gloves!

Production

This way GANS patches are created relatively quickly:

Method with GANS water
  1. Fill the clear water above the CO2 GANS (CO2 GANS water) in a bottle. Add a few drops of CuO2 GANS water into the bottle (and stir it well, best with a nanocoated stirrer that you easily can produce by yourself with a nanocoated copper coil and a rod).
  2. Prepare zip bags or a sealer and two layers of a kitchen paper towel.
  3. Drip 10-15 ml GANS-water of the prepared bottle onto the paper (according to the size of the patch take more or less of the liquid). Use a small syringe. If the whole paper is damp, put it into the bag, press out the air and close/seal the bag and label it immediately (what is the content, which GANS waters used, in which ratio, and date of production).
  4. GANS patches or pads should only be used by the people for whom they are made and intended. The best is to produce such patches consciously for a certain person with the intention that it should deliver exactly the fields which are needed for the healing process of this person. Do not transfer any GANS patch to others after it was already used by someone. (Exception: emergency case).
Method with liquid plasma

Prepare liquid plasma (as described above) of the different types of GANS (separate or as a mixture in the ratio as recommended)

  1. Prepare zip bags or a sealer and two layers of a kitchen paper towel.
  2. Drip 10-15 ml liquid plasma of the prepared bottle and one or two drops of CuO GANS water (pure) onto the paper (according to the size of the patch take more or less of the liquid). Use a small syringe. If the whole paper is damp, put it into the bag, press out the air and close/seal the bag and label it immediately (what is the content, which liquid plasmas in which ratio, how many drops of CuO GANS water are used, and date of production).
  3. GANS patches or pads should only be used by the people for whom they are made and intended. The best is to produce such patches consciously for a certain person with the intention that it should deliver exactly the fields which are needed for the healing process of this person. Do not transfer any GANS-patch to others after it was already used by someone. (Exception: emergency case).

Test if you get better results when you use GANS water for the patches or when you use liquid plasma for the production of the patches and please report the result of your research to the Keshe Foundation.

Application

Using the patches:

  • Simply apply them to aching area.
  • Works well on a bandage or plaster, too. Hand, arm shoulder, hip, knee, foot, ribs, solar plexus, neck etc.
  • In restlessness, grief, fears, worries: on solar plexus and neck ...

CAUTION: Do not use such patches on body parts that contain artificial material; for example nails, screws, plates, after surgical interventions. Do not apply at teeth with root canal treatment. Never on or near pacemakers

Application of plasma in emergency situations

Further information you can find at the 121st Knowledge Seekers Workshop, from Minute 21 and approx. Minute 35.

All health applications of the technology of the Keshe Foundation are researched only rudimentarily. Much further investigation has to be done in this field of science. Clinical trials and tests are only possible after the respective permission is given. All recommendations and proposals given here or in the teachings of Mr. Keshe are the result of previous tests with volunteers or a deduction of the theoretical approach. Each application of these proposals given here or on other sites is carried out with personal responsibility and with the consciousness to be a volunteer making private tests with this Plasma Technology in the area of health care.

As the previous tests have shown, plasma (the fields of which it consists) can help us in many situations very quickly. It can be applied by spraying, applying patches, and drinking.

To be prepared for emergency situations, the following GANS varieties should be promptly available; they are the GANS of:

  • CuO (or CuO2) (copper-oxides, the first is a turquoise-blue, the second brownish)
  • ZnO (or ZnO2) (zinc oxide, white)
  • CO2 (carbon dioxide, whitish)
  • CH3 (methyl group, reddish-brown)
  • CaO 2 (Calcium Oxide, color?) (To produce from the ashes of burnt bones)

Of each kind of GANS at least 100 ml (milliliter) should be made. Add to each (already washed) GANS a few drops of the amino acids from the same container, in which the respective GANS was prepared, and stir well. Each kind of GANS (including the corresponding amino acids) should be filled in a normal, previously thoroughly washed, beverage bottle (for example, mineral water bottle). Fill up at a maximum to 1/3 of the bottle volume then fill fully with distilled water, shake well or stir and then leave it and let it settle (at least 24 hrs). Use only the GANS water above of the GANS substance! The bottle can be repeatedly refilled. The GANS will therefore never be consumed (and retains its properties according to Mr. Keshe for more than three generations of men, perhaps many millennia). Even if during our lifetime no disasters happen, we can pass it as something valuable to our descendants. (How often you have to remove the GANS water and replace it with new distilled water, to prevent the formation of germs in it, experience will show. Feedback to the Keshe Foundation is requested.)

Mobile Plasma Units

Mobile Health Unit, created with a vacuum sealer.

A Plasma Unit consists basically of two "walls" on which either coils or GANS patches are mounted. The human stands between these walls. Through his body, the plasma flows from the rear to the front. The closer the coil or patches to the body, the better the body fields can be supplied.

While the Health Unit with coils*** is very complex and complicated to build, this mobile unit is very easy to create, especially if it is necessary to have it quickly. You only have to attach multiple GANS patches on the front and back of the body. It is only important that a flow of the plasma (field flow) takes place from the rear to the front. For the fields to flow in the right direction from the back towards the front of the body the patches in the back part have to provide stronger fields than the patches in the front part.

(***For stationary health units please consider the respective blueprints (LINK) )

Typically, the right direction of field flow can be achieved by adding CO2/zinc oxide GANS water in the patches of both sides and one or more GANS waters additionally in the patches on the back. This can e.g. be CH3 GANS water, some CuO GANS water and/or Food GANS water. Another possibility would be to attach all patches into one piece of sealed cover (with the front and rear part, including a hole for the head). You can create this e.g. with a vacuum sealer, as can be seen in the photo.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Decontamination of Water

Ratio of CuO water to contaminated water

In order to ensure that people will have clean drinking water for their demand, the CuO GANS water or CuO2 GANS water is used for decontamination of water. The dilution is 1:100. So use 1 liter CuO or CuO2 GANS water to 100 liters of contaminated water. Pour the CuO or CuO2 GANS water into the container with the contaminated water, stir and allow it to settle for 12 hrs. Then extract from above the clean water. From 100 liters polluted water so at least 50 liters of clean water can be produced.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Internal and external injuries

CO2 and ZnO GANS water acts excellently as a spray when sprayed on painful areas, (be careful: do not apply directly upon fractures, only around them, the bone needs the pain for the calcium to be created/incorporated). You can spray it also on clothes, tents and so on to protect against nuclear radiation and to keep warm.

In all situations of crisis our mind is so heavily loaded with all fears, confusion, depression, exuberant emotions and so on. In these cases always spray CO2 and ZnO GANS water (mixture) or drink it drop-wise (diluted in a glass or bottle of water) and/or apply patches on the solar plexus and neck. Also the compound of CO2, ZnO and CH3 GANS water can be used to strengthen the nervous system. Namely in a ratio of 20% CH3, 10% ZnO and 70% CO2 GANS water with a little amount of amino acids (only one drop of each kind).

In cases of exhaustion and/or hunger, combine CO2/ ZnO2 with CH3 GANS water. If you have it, apply two patches of different strength, one upon the solar plexus and the stronger one on the back, for example: CO2/ZnO2 and Food GANS water with amino acids at the back and CO2 GANS water at the solar plexus.

With open injuries, two or three different patches can be used: CO2, CH3 and CuO2 GANS water. Make three different patches and place them one above the other. They can be placed directly over the dressing. The CuO2 patch is to apply only for a short time. Its purpose is to prevent infection of wounds.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Infections of the skin, external injuries of the skin, cuts, sunburn, insect bites etc.

(See 121st. Knowledge Seekers Workshop, approximately from 29 minutes)

Application of liquid plasma created with drops of GANS water:

 CuO + Co2 (in the ratio 50%/50%) for spraying or patches 

Pour the liquid plasma (water with the same amount of drops of CuO and CO2 GANS water) into a spray-bottle and spray the wounds directly, or wet a paper napkin / paper towel with this mixture and apply it on the body part.

When you have an insect bite, wash it with CO2 GANS water to which you added only 1 drop of CuO GANS water.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Deep wounds with internal injuries (of inner organs) (except head; all which is below the neck)

(See 121st Knowledge Seekers Workshop, approximately from 29:50 minutes) Application of liquid plasma created with drops of GANS water:

 CuO2 (5 drops) + CO2 (3 drops) + ZnO (1 drop) + COHN (amino acids – 1 drop of each kind of GANS) oral, drink the drops diluted in a glass or bottle of water
  • CuO or CuO2 repairs muscle tissue and accelerates healing
  • CO2 connects, provides communication for the tissue repair, gives the body a part of the necessary energy
  • ZnO stabilizes emotions
  • COHN (Amino acids) provide the connection to the body

This mixture accelerates the healing of the injured tissue.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Fractures

(See 121st. Knowledge Seekers Workshop, approximately from 32 minutes) Application of liquid plasma created with drops of GANS water:

CO2 (2 drops) + Cu0 (3-4 drops) + CH3 (1 drop) + COHN (1 drop) + CaO Calcium oxide (1-2 drops) put a soaked towel around the fracture (not directly on the point of fracture).  
  • CO2-gives the body the necessary energy and provides the communication within the body
  • CuO and CuO2 disinfects and helps in muscle tissue healing
  • CH3 (iron GANS-water) amplifies energy for the healing process
  • COHN (amino acids) provide the connection to the body
  • CaO (Calcium oxide) for the reconstruction of bones

CaO GANS can be produced easily from the ashes of burnt bones.

Do not apply the soaked towel or spray directly upon the point of fracture, but only around the area of the fracture.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Head injury / brain injury

(See 121st. Knowledge Seekers Workshop, approximately from 34 minutes) Application of liquid plasma created with drops of GANS water:

CO2 (3 drops) + CaO (3 drops) + ZnO (4 drops) apply with patches or tubes

Begin with this application only after 2-3 weeks, as the brain itself starts to regenerate!!! Calcium oxide (CaO2) is needed for brain cells, usually the brain cells take calcium from the bones of the skull.

COHN (the amino acids) are important for the connection between the fields of the liquid plasma and the area of injury. They support the repair work of the body.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Disinfecting effect

(See 119th Knowledge Seekers Workshop, about 2 hours 21 minutes)

CuO GANS water mixed with CO2 GANS water could serve as a disinfectant for surgical instruments and hands. It has however still to be explored. Feedback from physicians is appreciated.

CO2 GANS water with very little CuO GANS water (see 119th Knowledge Seekers Workshop, about 2 hours 25 minutes) can be given in a spray bottle and used as a disinfectant solution (in toilets, kitchens, unpleasant odors disappear, usable as deodorant...). You can spray this solution on the skin, at skin diseases, even skin cancer, burns, ... With foot infections spray it, spray corns and apply patches, too. If bald or with thinning hair spray on the scalp and massage.

There is little experience, it just has to be tested. Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Treatment of eye problems

(See 22nd International Knowledge Seekers Workshop, about 1 hour 40 minutes)

In degenerative eye diseases, by the application in some cases the genetic cause can be changed, or if they are emotionally conditioned, the emotional balance can be restored, so that as a result the eyes are able to recover again.

Degenerative eye diseases can be processed with 3 GANS types:

  1. the GANS water of CO2 is used to connect the physicality with emotions = communication (4-5 drops)
  2. the GANS water of ZnO is used to provide support for the emotions (1-2 drops)
  3. The GANS water of CH3 is used to provide the energy for the recovery of the cells (for the conversion of the fields into matter) (2 or 1 drop)

CAUTION! With eye cancer you MUST NOT use CH3 GANS water because this promotes the growth!)

But for the treatment of muscles which move the eyeball for focusing, one needs in addition:

  • CuO2 GANS water (1/2 to 1 drop, 1 drop will already be too much), which supports the regeneration of muscle tissue
  • In the mixture you add very little (1 drop) of the amino acid from CO2 GANS.
  • But you should not use amino acids of CuO2 GANS, except when a muscular weakness of the eye muscles is present. Then you can add the amino acids of CuO2 GANS (but very little).
  • Whenever nerves are affected, add also the amino acids of ZnO GANS to the mixture.

To consider in the health sector, which GANS types should be used, one must consider the causes of the disease and the affected tissue. The amino acids always provide the link between the fields provided by the GANS water to the respective physical area in the body (CO2 generally, ZnO nerves, CuO2 muscle tissue, CaO bone tissue).

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Application of GANS water in relation to viruses

(See 135. Knowledge Seekers Workshop, approximately from 30 minutes)

This technology is suitable for dealing with viruses.

Viruses dock to their respective host cells. The CO2 GANS water is capable of separating this connection (by interaction of the fields of the CO2 GANS water with the fields of the virus, and by creating a field balance so that no further fields are available for the connection with the host cell).

Everything you need is therefore the CO2 GANS water. At the moment when one perceives an infection and the physician has determined that it is a viral infection, you can take 2-3 teaspoons of CO2 GANS water and then continue taking the same dose for 2 to 5 days. The virus should disappear, even if it is still there, it will no longer be effective.

In rare, very serious cases you can add in a ratio of 1:10 also CuO GANS-water, that is:

9 units (drops) CO2 GANS water + 1 unit (drop) CuO GANS water

Feedback and report of experiences to the Keshe Foundation are requested.


Is someone getting a flu shot, if so CO2 GANS water can be taken additionally.

Flu

If flu starts with high fever, you should take within the first half hour 3-4 tsp (teaspoon) CO2 GANS water with a drop of CuO GANS water, every 5 minutes. The temperature will drop quickly. Then do the same 2-3 times in the next hour and still 3-4 times during the rest of the day, then 3 - 4 times daily 2-3 tsp for 2 - 3 days. The hands should be washed with CO2 GANS water, too.

The pathogenic fields are literally washed out of the body through the CO2 GANS water. This GANS water supports an internal cleansing process.

If you have children with a high fever, you can wash or rub the body with the CO2 GANS water. Possibly also add a drop of CuO2 GANS water. The temperature will fall quickly.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Ebola, Malaria

Take 3 - 5 teaspoons or tablespoons CO2-GANS-water per day for 30 to 60 days, possibly even 100 days

Use at your own risk and danger. Feedback and report of experiences to the Keshe Foundation are requested.


Aids (HIV-positive)

(Procedure of Paul from Togo: see 135th Knowledge Seekers Workshop, approximately from 1 hour 48 minutes) 1. For 15-30 days only the liquid plasma of CO2 GANS water should be used for drinking, cooking, bathing, housecleaning, laundry cleaning, hand washing, etc. You should not drink anything else. (An indication from Paul regarding the amount of CO2 GANS water, which is added to the drinking water, was missing; Mr. Keshe recommended 3-4 times a day 1 tablespoon CO2 GANS water with a few drops CuO GANS water to add to the drinking water). 2. Thereafter you should produce Liquid plasma from a mixture of CuO GANS water CH3 GANS water CO2 GANS water and ZnO GANS water (in equal parts), and only this liquid plasma should be used for drinking, cooking, bathing, housecleaning, laundry cleaning, hand washing, etc. You should not drink anything else.

The first phase is used to purify the body. After several days this can lead to fatigue, nausea, blood in the urine or pain etc. In this time the body needs all the energy for healing, so you should sleep a lot. This condition should disappear after about 2 weeks. Then one can go from the first to the second phase.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.


Bacterial diseases

Bacteria are easier to treat. If the doctor prescribes an antibiotic, one can (in an autonomous, self responsible test) reduce the amount of the antibiotic (for example halve the tablet or cut in even smaller pieces) and additionally take in CO2 GANS water. It should prevent the rise of resistance to the antibiotic and cause the antibiotic to have a better effect. Feedback and advice to the Keshe Foundation are requested.

Use at your own risk and danger. Feedback and report of experience to the Keshe Foundation are requested.

Use in the oral hygiene

(See 135th. Knowledge Seekers Workshop, approximately from 56 minutes)

Instead of using toothpaste the mouth can be flushed with CO2 GANS water. It should be ensured that the liquid wets all areas of the oral cavity and the palate. This leads to a balancing of the environment in the mouth. This in turn prevents tooth and gum disease (because the microorganisms cannot find the right environment for propagation). This procedure is intended the two highlighted paragraphs need some clarity, they don’t make total sense to me.for prevention. Existing dental defects can thus not be repaired, but the progression should be broken. Some of the liquid can be swallowed, so it must not be regurgitated.

In addition one can chew 2-3 times a week at bedtime, a small piece of cheese and swallow it. This should also have a positive effect on the oral environment and help to prevent dental disease.

If precipitated milk teeth have been collected (is common in some countries) so they can be used for the production of Calcium GANS, which then supplies exactly the calcium-fields that are suitable for this man or woman.

For GANS production you can dissolve the teeth in lemon juice (or Coca Cola) and only afterwards you add the NaOH (method as in the Food GANS production).

As an alternative to physical GANS production from the teeth you can transmit the information of the teeth on water. For this purpose you take a round container with water and put 5 little bottles (vials) around it (evenly distributed), one with CO2 GANS, one with CH3 GANS, one with ZnO GANS, one with CuO GANS and the last one with the amino acids from the CO2 GANS production. Now lie or hang the tooth (teeth) directly above of the water. Over time, the water absorbs the fields from the bottles and from the tooth. This water you can drink. Or, if you e.g. intend to use it for the support of the healing of a bone fracture, apply a patch on the body, namely in front and back (or left and right) of the part of your body near the point of fracture.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.


Use in functional failure of organs

(See 135th Knowledge Seekers Workshop, approximately from 2 hours 23 minutes) The method of information of water by the 5 GANS bottles attached around a container with water, as described above, can also be used when someone is to be supported in the healing of an organ with functional loss.

In the future probably no more organ transplants will be necessary. So you could, for example, if somebody has bone marrow problems, find a healthy family member, who sits or lies with the upper part of the knee (where the kneecap) above the water container (with the 5 vials around). The information about the fields of the healthy bone marrow goes into the water beneath. Then the patient with the bone marrow problems can drink this water. In the future, Mr Keshe will add more information to this topic.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.


Toxins from the body wash

(See 135th. Knowledge Seekers Workshop, approx. 1 hour 13 minutes and from 2 hours 32 minutes) It should also be possible to wash toxins out of the body by using GANS water. It would be interesting to see if this will work for snake venom by snake bite or the like. You could rinse the bite wound with a mixture of CuO and ZnO GANS water and then drop a mixture of CO2 GANS water and ZnO GANS water (50:50) into the bite wound or drink it.

Cortisone retention after high doses of cortisone can get out of the body with CO2 GANS water and the essential oils of citrus fruits, but this is a prolonged process. Collect the oils from the peel of citrus fruits and mix it into the CO2 GANS water. Then wash your hands or wash the affected parts of the body with it.

Use only at your own risk and responsibility. Please report your experiences to the Keshe Foundation.

Specific Plasma Therapies, developed by doctors and therapeuts

Origination of Cancer

The cancer starts in a very simple way, the cancer starts with increase in gravitational field, when you have an increase of gravitational field, the cancer, the cell, the element is heavier than others. Because of that it is attracting more amino acid and it starts shelling itself and then it becomes a tumor. For instance, the center is copper, you can see it in the blood. An increase of the amount of copper means that this information has been transferred to the RNA and DNA. The whole structure of life is to extend the life, to survive longer. When the body finds a system that can stay longer than the others it immediately takes it.

The majority of cancers came through evolutionary cancer, as we assimilate we find a better situation and we accept the new positions and adapt, but some of us could not go through the evolution, they create a change and the cancer appears.

Parameters for Measuring Success with Plasma Technologies

This method gives the ability to measure your progress; you can measure the breathing rate. You get information about the intake of energy; you get information about the change of emotion as progress is going on.

Ask your patient to sit down, very calmly explain to them that you want them to breathe deep in and breathe out. Do this again the second time, breathe in and breathe out. The third time, you breathe in and you hold your breath, till it's hardly possible anymore and then breathe out. You measure the time the patient can hold their breath.

Then let your patient talk for a few seconds and then you ask them to again take another deep breath, take a second deep breath and let it out and this time put the index-finger on the left nostril and let them breathe in through the right nostril, let them hold the breath until it's not possible anymore, then let breath out. Put the index-finger on the right nostril; let them breathe in through the left nostril, hold the breath until it’s not possible any more, let them breathe out. Measure the time the patients can hold their breath.

Make these measurements before you start any therapy with your patients and document it. What you should see is a growth in the breathing time. There are people who start with 19 Seconds, over the months this will build up more and more. This extension in breathing will give you an insight not only of psychological change, also an insight in the physicality and how emotionally they have changed. The change of emotion shows in breathing, because blood is the source of the emotions; change the system and you find out they change the breathing. After 2-3 weeks you can see the difference.



Plasma Technology for Agriculture

Introduction to Plasma Technology in Agriculture

Plasma technology was developed by the Iranian nuclear engineer, Mehran Tavakoli Keshe. The technology is basically a spaceship technology but has many uses and applications in fields other that space or space related fields. Spaceship technology is different from space technology in that no motors or wings are needed for space travel as no motors or wings are found in the universe, yet planets, galaxies, and other bodies in the universe have been rotating for millions of years. When applied in agriculture, plasma technology is changing, and will continue to change people’s understanding of plants, soils, and agricultural practices in general. Duly understood and correctly applied, plasma technology has potential to completely transform agricultural practices, minimize cost for agriculture practitioners, enhance health and healthy living for both producers and consumers, and virtually eliminate external inputs in agricultural systems globally. Plasma technology in agriculture will also show over the next few years that this world has unlimited resources everywhere, and that it is the people who will need to learn and fully understand how to “harvest” those resources that they need for their agricultural practices, and for all their other needs in general.

Gasses in Nano State (GANS)

With full understanding of how plants absorb carbon dioxide from the atmosphere, Mehran Tavakoli Keshe designed technology that replicates a plant’s leaf for the effective capture of CO2 and other gases in their Nano states (GANS). A gas in Nano state is a new state of matter, where a gas molecule that becomes Nano of itself, appears as a solid state of matter (Keshe, MT, 2011. The Structure of Light). It is especially this seemingly simple, GANS capture technology that will, necessarily, completely transform agricultural development and practice once and for all.

CO2 GANS Capture

Text

Plasma Technology for Energy

Plasma Technology for Kids

Useful Sources, Tools in the internet

  1. Interactive Periodic Table, which directly links to Wikipedia: Link: http://www.ptable.com/
  2. When you are looking for Isotopes search for "material isotopes Wikipedia"
  3. Isotopes of Calcium: Link: http://en.wikipedia.org/wiki/Isotopes_of_calcium
  4. Isotopes of Silver: Link: http://en.wikipedia.org/wiki/Isotopes_of_silver#Silver-109
  5. Isotopes of Potassium: Link: http://en.wikipedia.org/wiki/Isotopes_of_potassium

Deutsche Version KFSSI WIKI Deutsch


References

  1. Beerlandt, C. (2003). The Key to Self-Liberation: 1000 Diseases and their Psychological Origins. Lierde, Belgium: Beerlandt Publications.
  2. Bradley, N. (2007). The Emotion Code: How to Release Your Trapped Emotions for Abundat Health, Love and Happiness. Wellness Unmasked Publishing. Mesquite, NV: Wellness Unmasked Publishing.